Difference between revisions of "User:IolandeIsbell105"

@@ Line 1: / Line 1: @@
-Learning how to construct your own COMPUTER from scratch is usually a very difficult task once you learn nothing about personal computers. However once you learn to do it and understand exactly how to handle it, it actually turns into quite enjoyable to be able to easily strip down and build-up old or brand-new PC's. I would want to take this chance to lay out the essential components of a computer and help you discover ways to build a pc from scratch.
-PC Components
-The most typical pc components that you simply must have are the mouse, keyboard, hard drive, floppy drive, ram chips, sound and graphics card, power supply, motherboard and check. I'm assuming you will know what each one of these components look such as. If you tend to be unsure about a number of components just hunt for pictures of them on the internet and you will dsicover what they are usually.
-Connection Process
-Firstly you have to work with the mother board as well as the mother board growing plate. Firstly, gently screw the particular motherboard onto the mother board plate with all the notches or screws which have been provided with your package or kit. Once this is done you will need to insert the CPU (Central Running Unit) into its slot about the motherboard. Sometimes these PROCESSOR sockets have levers which you need to gently release to open it up so take note of that. Gently slide your CPU into its socket making sure the pins about the backside slide inside correctly otherwise it could possibly get damaged. You can today clip the lever back to place and make sure it is secure.
-Now you will need to attach the heatsink to the CPU chip. You might discover that the CPU already comes with the heatsink/fan that come with it then you definitely can read even more. Now you should connect small cable from your heatsink fan towards the corresponding socket for the motherboard to offer it power.
-The next step is to place the ram chips to their respective slots that are long and skinny. Once this has been done you may possibly mount the motherboard mounting plate onto along side it of the pc and screw/slip it in in order that it is attached correctly.
-The power supply could be the next component to manage. The power supply area is usually located at the rear of the pc case and it is indicated with screw holes which can be unoccupied. Just try along with maneuver it around to fit with the corresponding holes before you decide to screw it in. The power supply includes a main system connection which gets attached to the power slot around the motherboard, a floppy power connector which gets connected to the floppy drive and a few standard peripheral power connectors (red-colored, yellow and african american wires) which get attached to your hard hard disks and cd roms. You will need to mount the computer drives, cd roms along with floppy drives along with connect them together with those connectors being sure that the red insert on each energy connector is pointed inwards on the motherboard. I'll explain exactly why below.
-Right, now we move onto the 2 ports on your motherboard called the principal and secondary IDE Plug-ins. You will notice them while they are rectangular together with brackets around these. these ports are utilized to connect the hard drives and cd roms. The cables that get plugged into these two locations are 40 flag IDE cables together with have 3 contacts on each cable tv. Make sure the longest part of the cable is associated with the IDE locations. You need for connecting the primary IDE cable in the motherboard to your hard drive(s) and the secondary IDE port can be used to connect your own DVD Roms for your motherboard. When you connect these IDE cables to the cdroms and hard drives be sure that the red insert strip is side-by-side with the red-colored wire strip in the power connectors that are connected to people devices. Consult your manual if you have one to find out how to use the different jumpers to modify between master and also salve drives about each port. This will allow you to choose which hard disks are primary and secondary.
-Now that the energy supply is attached to the motherboard as well as the various other components you need to plug graphics and sound card to their slots. Once this is done be sure to connect the entrance panel connectors on the corresponding LED lights which means that your lights will make an appearance when the pc boots. Failure to do so can lead to non function with the system.
-Lastly make certain everything is linked properly. This includes the external mouse, keyboard, monitor cable and power cables so the computer will first turn on and function correctly. If all is done well then it must be okay.[http://georgecastil12.xanga.com/762754192/eliminate-this-viruses-which-will-not-shield-your-pc/ read more]

Difference between revisions of "User:IolandeIsbell105"

Latest revision as of 21:34, 4 May 2016

Navigation menu

Search