Difference between revisions of "Profile Editions"

From QIBA Wiki
Jump to navigation Jump to search
m
 
(10 intermediate revisions by 2 users not shown)
Line 1: Line 1:
(Page under revision by Process Cmte during 2021.03)
+
Because multiple editions of a given Profile are formally published as it advances through the QIBA Process, ensure certain details are visible when referencing the Profile by using the following template:
 +
* <'''Modality'''> <'''Biomarker Name'''> - <'''Publication Date'''> ('''Stage''')
  
===QIBA ZZZZZ Profile (YYYY)===
+
'''Modality''' and '''Stage''' should be obvious. '''Publication Date''' is the date of the draft at the end of the [[Review Process|'''publication approval process''']].
  
A Technically Confirmed or Claim Confirmed Profile is a stable specification to which products and sites can claim conformance.
+
The '''Biomarker Name''' is determined by the Profile Authoring Group based on what is both clear and convenient to their community.  Often it will make sense to include the relevant anatomy if that is key to the biomarker scope. The use of abbreviations and acronyms is up to the Profile Authoring Group based on what would be clear to their intended clinical audience. Try to keep the Biomarker Name short enough that people can conveniently refer to it verbally.
  
The published Profile captures trade-off choices between what requirements were considered reasonably achievable and what performance is useful/acceptable.
+
For examples, refer to the '''[[Profiles]]''' page.
  
Those choices, however, represent a snapshot at a particular point in time. 
+
''Rationale'':
  
As the underlying biomarker is adopted, performance expectations may increase, for example to meet the needs of a new clinical application, and new technologies may become more widely available in the installed base, making it practical to add them to the conformance requirements.
+
The modality is a useful way to group biomarkers and is often a key piece of scope.
  
Making such changes to the Claim or Requirements of an existing edition of a Profile would invalidate published Conformance Statements.  
+
It is important to understand that a Profile embodies trade-off choices between what requirements were considered reasonably achievable and what performance was considered useful/acceptable. Those choices, however, represent a snapshot at a particular point in time.  Over time, performance expectations may increase (for example to meet the needs of a new clinical application) and new technologies may become more widely available in the installed base, making it practical to raise conformance requirements.
  
We can, however, publish a new edition of the Profile, which documents the same biomarker but with revisions to the claim and requirements.
+
The publication date indicates which of two editions of a Profile is newer and also provides a temporal context for the tradeoffs. A 2018 Profile reflects the expectations and technologies of 2018.  
  
Discussion:
+
It is expected that new editions of a Profile may be published when there are significant advancements in technology and/or expectations. Older sites and systems can still claim conformance to the older editions of a Profile, while others will pursue more cutting-edge performance. 
  
TODO Consider working the Stage in.  e.g. 2020 Stage:2. Also should we also incorporate versioning 3.1. Work up the use cases - publication, conformance, document change tracking, etc.
+
The [[QIBA Profile Stages|'''Profile Stage''']] is important to understand the level of maturity and stability of the Profile. A Clinically Feasible or Claim Confirmed Profile is a stable specification to which products and sites can claim conformance.  
  
What if groups update within one year? 2020 -> 2020A? Agree we need to have a mechanism.
+
''Usage'':
  
Is it a good thing if our "stable specification" are changing multiple times a year?
+
A product conformance claim might say
 +
* This product conforms to the QIBA PET Amyloid 2022-06-03 (Clinically Feasible) Profile as the Acquisition Device actor.
 +
A site conformance claim might say
 +
* This site conforms to the QIBA CT Lung Density 2020-09-04 (Consensus) Profile.
 +
Documents such as Clinical Trial Protocols, imaging guidelines, or publications from professional organizations or commercial entities might say things like
  
Using MRE as an example, what about changes that are not normative changes?
+
* This protocol incorporates the requirements of the QIBA MR Elastography of the Liver 2022-02-14 (Clinically Feasible) Profile.
 
 
Claim Format:
 
* This product conforms to the Tech Confirmed QIBA XXX Profile (2020) vs Claim Confirmed QIBA XXXX Profile (2020)
 
* This product conforms to the Tech Confirmed QIBA XXX Profile V3.1 2020.09.22 vs Claim Confirmed QIBA XXX Profile V3.2 2020.12.22
 
 
 
"Significant differences" = changes in the conformance requirements pass thresholds or the assessment procedures; biomarker is the same,
 
 
 
Questions
 
* Different biomarker (2D->3D)
 
* Different anatomy
 
* Different values (refined) in performance claim
 
* Q. When is a separate profile warranted?
 
* Q. Can someone claim conformance for the Profile in one piece of anatomy but not others?
 
 
 
Example:
 
 
 
The '''QIBA ZZZZZ Profile (2013)''', which represents what was considered reasonable performance in 2013, can be published alongside '''QIBA ZZZZZ Profile (2015)''', which reflects the emergence and adoption of newer technologies that provide a significant and useful improvement in performance.  Although some sites and products might still only be able to claim conformance to QIBA ZZZZZ Profile (2013), we still know what level they are operating on.
 
 
 
Note that additional field testing might be needed before the revised edition could be considered Technically or Clinically Confirmed.
 

Latest revision as of 20:01, 19 January 2024

Because multiple editions of a given Profile are formally published as it advances through the QIBA Process, ensure certain details are visible when referencing the Profile by using the following template:

  • <Modality> <Biomarker Name> - <Publication Date> (Stage)

Modality and Stage should be obvious. Publication Date is the date of the draft at the end of the publication approval process.

The Biomarker Name is determined by the Profile Authoring Group based on what is both clear and convenient to their community. Often it will make sense to include the relevant anatomy if that is key to the biomarker scope. The use of abbreviations and acronyms is up to the Profile Authoring Group based on what would be clear to their intended clinical audience. Try to keep the Biomarker Name short enough that people can conveniently refer to it verbally.

For examples, refer to the Profiles page.

Rationale:

The modality is a useful way to group biomarkers and is often a key piece of scope.

It is important to understand that a Profile embodies trade-off choices between what requirements were considered reasonably achievable and what performance was considered useful/acceptable. Those choices, however, represent a snapshot at a particular point in time. Over time, performance expectations may increase (for example to meet the needs of a new clinical application) and new technologies may become more widely available in the installed base, making it practical to raise conformance requirements.

The publication date indicates which of two editions of a Profile is newer and also provides a temporal context for the tradeoffs. A 2018 Profile reflects the expectations and technologies of 2018.

It is expected that new editions of a Profile may be published when there are significant advancements in technology and/or expectations. Older sites and systems can still claim conformance to the older editions of a Profile, while others will pursue more cutting-edge performance.

The Profile Stage is important to understand the level of maturity and stability of the Profile. A Clinically Feasible or Claim Confirmed Profile is a stable specification to which products and sites can claim conformance.

Usage:

A product conformance claim might say

  • This product conforms to the QIBA PET Amyloid 2022-06-03 (Clinically Feasible) Profile as the Acquisition Device actor.

A site conformance claim might say

  • This site conforms to the QIBA CT Lung Density 2020-09-04 (Consensus) Profile.

Documents such as Clinical Trial Protocols, imaging guidelines, or publications from professional organizations or commercial entities might say things like

  • This protocol incorporates the requirements of the QIBA MR Elastography of the Liver 2022-02-14 (Clinically Feasible) Profile.